Optimal control of the part mass for the injection molding process

Jakob Maderthaner, Andreas Kugi, Wolfgang Kemmetmüller

Research output: Contribution to journalArticlepeer-review

Abstract

Injection molding is one of the most important processes to manufacture plastic goods. During the long production times, process variations might lead to a varying product quality. Therefore, in the state of the art, the machine variables of injection molding machines (e. g. the barrel temperature and the screw speed) are controlled to suppress these variations. However, the influence of changes of the raw material on the part quality cannot be systematically suppressed with state-of-the-art controllers. In this work, a novel control concept is proposed where the part mass is controlled instead of the usual machine variables. The control strategy is based on an estimation of the plastics mass in the mold. In order to account for the system nonlinearities, a model predictive control strategy is developed for both the filling and the holding-pressure phase. The feasibility and the benefits of this proposed part-mass control strategy is evaluated by a series of measurements on an electric injection molding machine.
Original languageEnglish
Article number103027
Number of pages12
JournalJournal of Process Control
Volume129
DOIs
Publication statusPublished - Sept 2023

Research Field

  • Complex Dynamical Systems

Keywords

  • Injection molding
  • Part quality
  • Part weight
  • Part-mass estimation
  • Model predictive control
  • Quadratic program
  • Measurements

Fingerprint

Dive into the research topics of 'Optimal control of the part mass for the injection molding process'. Together they form a unique fingerprint.

Cite this